欢迎来到上海祥篆机械制造有限公司网站!

服务热线:13045684568

  • 破碎机
热门搜索:

破碎机,制砂机,圆锥破碎机

产品中心

热门新闻

联系我们

上海祥篆机械制造有限公司

联系人:夏总

电话:13045684568

地址:江苏省启东市滨海园区江州路12号

高压磨粉机

高压磨粉机
访问量 : 5370
编辑时间 : 2021-06-28
详细介绍

  产品概述/productoverview


  高压磨粉机是传统工业磨粉机的基础上,引进国外的工业制粉技术,组织技术专家和相关工程人员经过精心设计、试验和改进开发出的世界领先的工业磨粉机。适用于建材、化工、冶金、矿山、火电、煤炭等行业产品物料的粉磨加工。粉磨莫氏硬度在9.3级以下,湿度在6%以下的各种非易燃易爆矿产物料;如水泥(生熟料)、煤、滑石、长石、石英、矿渣、云母、方解石、石灰石、重晶石、硫酸钾、膨润土等干余种。


  High pressure mill is a world leading industrial mill, which is based on the traditional industrial mill,introduces foreign industrial miling technology, organizes technical experts and relevant engineeringpersonnel to develop through careful design, test and improvement. Itis suitable for grinding materials inbuilding materials, chemical industry, metallurgy, mining, thermal power, coal and other industries.Grinding all kinds of non flammable and explosive mineral materials with Mohs hardness below 9.3 andhumidity below 6%;Suchas cement (raw clinker), coal, talc, feldspar, quartz, slag, mica, calcite, limestone,barite, potassium sulfate, bentonite, etc.


  工作原理/working principle


  大物料由颚式破碎机破碎至所需粒度,由斗式提升机运至储料斗,并通过振动给料机均匀连续地送入主装置进行粉碎。粉碎后的粉磨通过气流从鼓风机输送到分级机进行分级,满足细度的颗粒通过管道进入旋风收集器,并在那里分离和收集。在排出阀处排出,成为成品;气流通过旋风收集器顶部的回流管被吸入鼓风机。整个气流系统是密封循环,在正负气压下循环。


  The large materials are crushed to the required size by jaw crusher, transported to the storage hopperby bucket elevator, and uniformly and continuously sent to the main device for crushing by vibratingfeeder. The comminuted grinding is transported from the blower to the classifier for classification by airflow, and the particles meeting the fineness enter the cyclone collector through the pipeline, where theyare separated and collected. Discharge at the discharge valve to become the finished product; The air flowis drawn into the blower through the return pipe at the top of the cyclone collector. The whole air flowsystem is a sealed cycle, circulating under positive and negative air pressure.


  产品优势和特点/Product advantages and features


  1、独特的设计、增加加压装置,提高产量;

  2、物料适用性强,可针对莫氏硬度9.3级以下的各种物料;

  3、磨辊、磨环使用寿命长;

  4、设备自带除尘设备,满足环保要求。


  1. Unique design,increase pressure device,improve production;

  2. lt can be used for all kinds of materials with Mohs hardness below 9.3;

  3.The service life of grinding roller and ring is long;

  4. The equipment is equipped with dust removal equipment to meet the requirements of environmental protection.

     2.jpg


  产品参数/Product parameters


      1.jpg




  上海祥篆机械制造有限公司是破碎筛分设备供应商,公司总部位于上海浦东新区。长期以来,公司秉承现在企业的科学管理模式,精工制造、锐意进取、开拓创新、快速崛起成为国内专业的破碎机供应商之一。我们为客户提供全系列破碎筛分设备、工业磨粉设备、选矿设备及成套设备解决方案。

  公司本着以“诚信为本,客户至上,质量至上”的经营服务理念,立志把“山啸牌”打造成破碎筛分行业品牌,确立了设计,制造,营销和服务四大体系。公司具有完善的售后服务网络和严格培训的售后工程师,能够及时快速有效的提供维修服务,保证客户能连续有效安全生产。我们坚持以客户为中心,快速有效响应客户要求,持续为客户创造长期价值而成就客户,成就客户就是成就我们自己,让我们共同发展,开创美好未来!

13045684568