欢迎来到上海祥篆机械制造有限公司网站!

服务热线:13045684568

  • 破碎机
热门搜索:

破碎机,制砂机,圆锥破碎机

产品中心

热门新闻

联系我们

上海祥篆机械制造有限公司

联系人:夏总

电话:13045684568

地址:江苏省启东市滨海园区江州路12号

超细微粉磨

超细微粉磨
访问量 : 5361
编辑时间 : 2021-06-28
详细介绍

  产品概述/Productoverview


  超细微粉磨是在积累了多年磨粉机生产经验的基础上,吸纳了国际先进的机械制造技术,并经过多年的试验与改进而开发的一种新型超细粉(325-2500目)加工设备。主要只用于对中、低硬度,莫氏硬度≤6级的非易燃易爆的脆性物料的超细粉加工,细粉成品粒度在325-3000目之间任意调节,产量可达0.4-4.5吨每小时。


  Superfine powder mill is a new type of superfine powder (325-2500mesh) processing equipment, which is developedon the basis of many years of experience in the production of grinding machine, absorbing the international advancedmachinery manufacturing technology, and through many years of experiment and improvement. It is mainly used forprocessing non inflammable and explosive bittle materials with medium and low hardness and Mohs hardness s 6. Theparticle size of fine powder can be adjusted between 325-3000 mesh, and the output can reach 0.4-4.5tons per hour.


  工作原理/working principle


  主机电动机通过减速器带动主轴及转盘旋转,转盘边缘的辊销带动几十个磨辊这磨环滚道内滚动。大块物料经锤式破碎机破碎成小颗粒后提升机送入储料仓,再经过震动给料机和倾斜的进料管,将物料均匀地送到转盘上部的散料盘上。物料这离心力的作用下散向圆周边,并落入磨环的滚道内被环辊冲击、滚辗、研磨,经过三层环道的加工变成粉体,高压风机通过抽吸作用将外部空气吸入机内,并将粉碎后的物料带入选粉机内。选粉机内旋转的叶轮使粗物料回落重磨,符合要求的细粉则随气流进入旋风集粉器并由其下部的卸料阀排出即为成品,而带有少量粉尘的气流则经过脉冲除尘器后通过风机和消声器排出。


  The main motor drives the spindle and the turntable to rotate through the reducer, and the roller pin at the edge of theturntable drives dozens of grinding rollers to roll in the grinding ring raceway. After large pieces of material are broken intosmall particles by hammer crusher, the elevator is sent to the storage bin, and then the material is evenly sent to the bulk trayon the upper part of the rotary table through vibrating feeder and inclined feeding pipe. Under the action of centrifugal force,the material disperses to the periphery of the circle and falls into the raceway of the grinding ring. It is impacted, rolled andground by the ring roller. After the processing of the three-layer raceway, it becomes powder. The high-pressure fan sucksthe external air into the machine through the suction action, and brings the crushed material into the powder separator. Therotating impeller in the separator makes the coarse material fall back for regrinding. The fine powder that meets therequirements enters the cyclone collector with the air flow and is discharged by the discharge valve at the lower part of thecyclone collector. The air flow with a small amount of dust is discharged through the fan and muffler after passing through thepulse dust collector.


  产品优势和特点/Product advantages and features


  1、比传统磨粉机械更加高效,节能;

  2、磨辊、磨环采用特殊材料,易损件使用寿命长;3、使用脉冲除尘器、消声器,具有环保、清洁。


  1. It is more efficient and energy-saving than traditional grinding machinery;

  2. The grinding roller and ring are made of special materials, and the wearing parts have long service life;

  3. The use of pulse dust remover, muffler, with environmental protection, clean.

      2.jpg


  产品参数/Product parameters

 

   1.jpg


  上海祥篆机械制造有限公司是破碎筛分设备供应商,公司总部位于上海浦东新区。长期以来,公司秉承现在企业的科学管理模式,精工制造、锐意进取、开拓创新、快速崛起成为国内专业的破碎机供应商之一。我们为客户提供全系列破碎筛分设备、工业磨粉设备、选矿设备及成套设备解决方案。

  公司本着以“诚信为本,客户至上,质量至上”的经营服务理念,立志把“山啸牌”打造成破碎筛分行业品牌,确立了设计,制造,营销和服务四大体系。公司具有完善的售后服务网络和严格培训的售后工程师,能够及时快速有效的提供维修服务,保证客户能连续有效安全生产。我们坚持以客户为中心,快速有效响应客户要求,持续为客户创造长期价值而成就客户,成就客户就是成就我们自己,让我们共同发展,开创美好未来!

13045684568