欢迎来到上海祥篆机械制造有限公司网站!

服务热线:13045684568

  • 破碎机
热门搜索:

破碎机,制砂机,圆锥破碎机

产品中心

热门新闻

联系我们

上海祥篆机械制造有限公司

联系人:夏总

电话:13045684568

地址:启东市明珠路118号

重锤式破碎机

重锤式破碎机
访问量 : 265
编辑时间 : 2021-06-28
详细介绍

  产品概述/Productoverview


  重锤式破碎机,满足破碎石料一次成型,无需二次破碎整形国产,可以降低成本40%左右,耗能低,投资少。广泛应用于矿山、冶铁、建材、公路、铁路、水利和化学工业等众多行业。特别适用于破碎石灰石及抗压强度低于200mpa中等硬度的石料,如石灰石、黄岗岩、大理石、玄武岩、铁矿石、河卵石、页岩、青石、煤炭、鹅卵石、建筑垃圾等。


  The heavy hammer crusher can meet the requirements of one-time forming of crushed stone withoutsecondary crushing and shaping. It can reduce the cost by about 40% with low energy consumption andless investment. It is widely used in mining, iron smelting, building materials, highway, railway, waterconservancy, chemical industry and many other industries. Itis especially suitable for crushing limestoneand medium hardness stone with compressive strength less than 200MPa, such as limestone, granite,marble, basalt, iron ore, river pebble, shale, bluestone, coal, cobble, construction waste, etc.


  工作原理/working principle

  重锤式破碎机的主要工作部件为带有锤子(又称锤头)的转子。转子由主轴、圆盘、销轴和锤子组成。电动机带动转子这破碎腔内高速旋转。物料自上部给料口给入机内,受高速运动的锤子的打击、冲击、剪切、研磨作用二粉碎。在转子下部,设有筛板、粉碎物料小于筛孔尺寸的粒级通过筛板排出,大于筛孔尺寸的粗粒级阻留在筛板上继续受到锤子的打击和研磨,最后通过筛板排出机外。


  The main working part of heavy hammer crusher is the rotor with hammer (also known as hammerhead). The rotor consists of spindle, disc, pin and hammer. The motor drives the rotor to rotate at highspeed. The material is fed into the machine from the upper feeding port, and is smashed by the impact,impact, shearing and grinding of a high-speed hammer. In the lower part of the rotor, there is a sieveplate. The particle size of the crushed material smaller than the size of the sieve hole is dischargedthrough the sieve plate, and the coarse particle size larger than the size of the sieve hole is retained on thesieve plate to continue to be hit and ground by the hammer, and finally discharged out of the machine through the sieve plate.


  产品优势和特点/Product advantages and features


  1、进料口大、破碎腔高、适应物料硬度高,块度大,产品石粉少;

  2、采用高锰钢和高铬铸铁材质,产品耐磨性强;

  3、入料粒度大,出料粒度大,变多级破碎为一级破碎;

  4、筛板控制出料、成品粒度均匀。

  1. It has large feeding port, high crushing chamber, high hardness, large lumpiness and less stone powder;

  2. Made of high manganese steel and high chromium cast iron, the product has strong wear resistance;

  3. The feeding particle size is large, the dischargingparticle size is large, and the multi-stage crushing is changed into the first stage crushing;

  4. The sieve plate controls the discharge and the finished product has uniform particle size.


  产品参数/Product parameters


    1.jpg




  上海祥篆机械制造有限公司是破碎筛分设备供应商,公司总部位于上海浦东新区。长期以来,公司秉承现在企业的科学管理模式,精工制造、锐意进取、开拓创新、快速崛起成为国内专业的破碎机供应商之一。我们为客户提供全系列破碎筛分设备、工业磨粉设备、选矿设备及成套设备解决方案。

  公司本着以“诚信为本,客户至上,质量至上”的经营服务理念,立志把“山啸牌”打造成破碎筛分行业品牌,确立了设计,制造,营销和服务四大体系。公司具有完善的售后服务网络和严格培训的售后工程师,能够及时快速有效的提供维修服务,保证客户能连续有效安全生产。我们坚持以客户为中心,快速有效响应客户要求,持续为客户创造长期价值而成就客户,成就客户就是成就我们自己,让我们共同发展,开创美好未来!

13045684568